FuelTech
Filters
3-WAY BOOST CONTROLLER VALVE
FuelTechPressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT
4x WB-O2 Nano Harness
FuelTech4x WB-O2 Nano Harness. Install 4 Nanos with ease!
Alcohol O2 - Dual Channel Harness
FuelTechAlcohol O2 - Dual Channel harness.Harness comes pre-wired for 2 O2 Sensors Length: 8ft
Alcohol O2 - Dual Channel Lab Grade O2 Conditioner
FuelTechDescription Downloads For use with the lab grade NTK sensors. If you do not have that specific sensor then check out our WB-O2 Nano. CAN commun...
View full detailsBoost Controller Dual Valve Kit
FuelTechUse with FT450 / FT500LITE / FT500 / FT550 / FT550LITE / FT600 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT...
View full detailsBoostController2 Harness
FuelTechBoostController2 harness.No of ways: 24 Length: 3m (9.8ft)
CAN Tee Harness
FuelTechCompatible with FT600, FT550, FT500, FT500LITE, FT450, FT400, FT350, BoostController2 and GearController Two male and one female plugs Length: 1m ...
View full detailsCDI Racing Ignition Coil
FuelTechDescription Downloads CDI Racing Ignition Coil Manual Features The FuelTech CDI Racing Ignition Coil is made to be used with our FuelTec...
View full detailsEGT-4 CAN
FuelTechDescription Downloads 4 channel conditioner for Type K thermocouples with CAN communication for PowerFT ECU's. EGT-4 CAN Manual FEATURES ...
View full detailsEGT-4 CAN Harness
FuelTechEGT-8 CAN Harness
FuelTechHarness used for EGT-8 CAN
EGT-8 to Dual EGT-4 Adapter Harness
FuelTechETM-1 EGT Conditioner
FuelTechDescription Downloads Thermocouple Conditioner type K with 0-5v output. Type K thermocouple conditioner One channel 0-5V analog output Voltag...
View full detailsFT Blower EFI Injector Manifold
FuelTechThe FT Blower Manifold has an ORB16 Inlet, ORB12 Outlet, and accepts injectors with ORING/AN4 fittings
FT Injector 170 lb/h
FuelTechDescription Downloads The FT Injector 170 lb/hr (1785cc/min @ 43.5 psi) is a high impedance injector from the FT Injector family, no Peak and Ho...
View full detailsFT Injector 230 lb/h
FuelTechDescription Downloads The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. ...
View full detailsFT Injector 320 lb/h
FuelTechDescription Downloads The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. ...
View full detailsFT Injector 520 lb/h
FuelTechDescription Downloads The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. F...
View full detailsFT Injector 720 lb/h
FuelTechDescription Downloads The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. F...
View full detailsFT Injector 820 lb/h
FuelTechDescription Downloads The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. F...
View full detailsFT Input Expander
FuelTechDescription Downloads Input Expander Module for PowerFT line FT Input Expander Manual Input Expander Module for PowerFT line (FT500 / FT500LI...
View full detailsFT Input Expander Harness
FuelTechFT Input Expander Harness, Length 10ft.
FT250/300/350/400 Dyno Extension - Main Harness
FuelTechUsed to extend main harness on dynamometers. Has male and female plugs.No of ways: 24 Length: 13ft
FT250/300/350/400 Unterminated Main Harness
FuelTechFT200, FT250, FT300, FT350 and FT400 main harness Used on rear engine vehicles No of ways: 24