Fueltech

Description Downloads The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required.  ...

Description Downloads The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required.  F...

Description Downloads The FT Injector 170 lb/hr (1785cc/min @ 43.5 psi) is a high impedance injector from the FT Injector family, no Peak and Ho...

Description Downloads The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required.  F...

Description Downloads The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required.  F...

WB-O2 Datalogger harness.Feed inputs, analog channel inputs and analog outputNo of ways: 10 Length: 2.5m (8.2ft)

Compatible with FuelTech NanoPRO product, not compatible with FuelTech WB-O2 Nano. This harness is specifically designed for use with the Bosch LSU...

SparkPRO-1 harness.No of ways: 4 Length: 2m (6.5ft)

SparkPRO-2 harness.No of ways: 6 Length: 2m (6.5ft)

Compatible with WB-O2 Nano and the new NanoPRO. For use with the Bosch LSU4.2 O2 sensor. Length: 2m (6.5ft) - Recommended size for most application...

SparkPRO-4 harness.No of ways: 10 Length: 2m (6.5ft)

SparkPRO-3 harness.No of ways: 8 Length: 2m (6.5ft)

SparkPRO-8 harness.No of ways: 18 Length: 2m (6.5ft)

SparkPRO-5 harness.No of ways: 12 Length: 2m (6.5ft)

SparkPRO-6 harness.No of ways: 14 Length: 2m (6.5ft)

Peak & Hold harness.Compatible with all current versionsNo of ways: 10 Length: 2m (6.5 ft) 

WB-O2 Datalogger adapter Harness to FT400/FT350/FT250/FT300/

This adapter is used when using our Alcohol wideband O2 conditioner with a Bosch O2 sensor. This adapter is designed for converting one of our pr...

Peak and Hold Jumpers are required when using any GENII-GENIII FT complete harness with high impedance injectors.

This adapter is required when using our Alcohol O2 module with our PRO500 or PRO600 harness. It will adapt the dual Nano connectors to a single d...

This adapter is used when running a LSU4.2 wiring harness with a NanoPRO to use a NTK lab grade sensor. This adapter is used when running our Al...

Peak and Hold Jumpers are required when using any complete FT harness with high impedance injectors. (1 per 4 injectors).